The Step-by-Step Guide
If you have a toilet that is overflowing, the first thing you need to do is find the source of the problem. In most cases, it is something simple that can be fixed without calling a plumber. Also check out this plumber in Sandy.
If the water level in the tank is too high, this is usually the cause of an overflowing toilet. To fix this, you will need to adjust the float. The float is a small ball that floats on top of the water in the tank. It controls how much water is allowed into the bowl. If it is set too high, it will cause the bowl to overflow.
To adjust the float, turn off the water supply to your toilet. Then, flush the toilet to empty out as much water from the tank as possible. Next, locate the fill valve and unscrew it from the side of the tank. Once you have access to the float, simply adjust it so that it sits lower in the tank. Screw back on the fill valve and turn on the water supply. Test your toilet to see if it is now flushing correctly.
If your toilet is still overflowing, there may be something blocking the drain pipe. The most common culprit is a blockage in the P-trap. The P-trap is located under the bowl and connects to the drain pipe. It is designed to trap debris so that it does not enter the drain pipe and cause a clog. To clean out the P-trap, simply remove it from the underside of the bowl and empty it into a bucket. You may need to use a plunger to dislodge any stubborn debris. Once you have cleared out the P-trap, replace it and test your toilet again.
If your toilet is still having problems, there may be a more serious issue with the plumbing. In this case, it is best to call a plumber. They will be able to diagnose the problem and make the necessary repairs.
…